Home » Products » Wireless » High Power & High Gain Wireless » TL-WA5110G

54Mbps High Power Wireless Access Point
TL-WA5110G

Highlights:

  • High Power design to boost your signal coverage and link speed
  • Passive Power over Ethernet for flexible deployment
  • Long distance wireless supported, up to 50km
  • WISP Mode supported

Overview

What This Product Does

The TL-WA5110G High Power Wireless Access Point is dedicated to Small Office/Home Office (SOHO) and long distance wireless network solutions. It integrates the functions of a Wireless Access Point, WISP Client, Firewall, and Router.

Long Distance Wireless Connectivity

The High Power Wireless Access Point features high output power and high RX sensitivity can significantly extend the transmission range to reduce dead spots and to deliver a more stable wireless connection. Also supports distance control from 0km to 52.6km, which breaks through distance limitations in normal 802.11g devices, enables ultra-long distance wireless transmission.

Easy To Use

The TL-WA5110G is easy-to-manage. Quick Setup is supported and friendly help messages are provided for every step. So you can configure it conveniently and share the Internet more quickly and easily.

Multiple Operation Modes

The TL-WA5110G provides three operation modes for multiple users to access the Internet: AP client router, AP router and AP. In AP client router mode, it works as a WISP CPE. In AP router mode, it can access the Internet via an ADSL/Cable Modem. In AP mode it can work in various modes, such as Access Point/Client/WDS Bridge/Repeater.

Versatile Access Point

- Bundled antenna alignment tool, which enables the best transmission and reception signals for superior wireless performance.
- Bundled power injector also provides flexible installation options in hard-to-wire locations.
- Integrated two useful tools: Speed Test and Throughput Monitor, user can easily get the operation information of access point without setup professional test software.
- Supports Ping Watch Dog which enables the device to reboot itself if the device has any errors. This self-recover feature reduces the time spent manually configuring the device.
- Bundled Client Isolation function protects the security and privacy of each individual subscriber. Therefore, subscriber does not need to worry about hacker attacks in the same wireless network.

WPA / WPA2 Encryptions - Advanced Security

With the most attentive wireless security, the TL-WA5110G 54M High Power Wireless Access Point provides multiple protection measures. It can be set to turn off wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The AP provides wireless LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security.

Features

  • Supports AP Client Router, AP Router and AP operation mode
  • High output transmission power and reception sensitivity optimized
  • Supports WISP Mode (PPPoE client on wireless interface)
  • Supports Passive Power over Ethernet
  • Supports Wireless Distribution System (WDS)
  • Distance Adjustment for long range transmission
  • Supports Antenna Alignment Supports Layer 2 User Isolation
  • Provides throughput monitor indicating the current wireless throughput
  • Supports Ping Watch Dog
  • Supports Link Speed Test
  • Supports Remote Management
  • Supports PPPoE, Dynamic IP, Static IP Internet Access
  • Built-in NAT and DHCP server supporting Address Reservation
  • Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through
  • Provides 64/128/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security and TKIP/AES encryption WLAN ACL (Access Control List)
  • Supports configuration backup/restore and firmware upgrades
  • Wall mounted available, also can be placed horizontally on a table or desk

Specifications

HARDWARE FEATURES
InterfaceOne 10/100M Ethernet Port(RJ45)
Support Passive PoE
ButtonReset Button
External Power Supply12VDC/ 1A
Wireless StandardsIEEE 802.11g, IEEE 802.11b
Dimensions ( W x D x H )6.5×4.2×1.1 in. (165×108×28mm)
Antenna Type4dBi Detachable Omni Directional (RP-SMA)
WIRELESS FEATURES
Frequency2.4-2.4835GHz
Signal Rate11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)
Transmit Power<20dBm (EIRP, For countries using CE Standards)
<27dBm (EIRP, For countries using FCC Standards)
Reception Sensitivity54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Wireless ModesAP Router Mode
AP Client Router Mode (WISP Clent)
AP/Client/WDS Bridge/Repeater mode
Wireless FunctionsEnable/Disable Wireless Radio, WDS Bridge,
Wireless SecuritySSID Enable/Disable
MAC Address Filter
64/128/152-bit WEP Encryption
WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP) Encryption
Wireless Range50km (High gain directional antenna required)
DHCPDHCP Server
Quality of ServiceWMM
ManagementSNMP
OTHERS
CertificationCE, FCC, RoHS
Package ContentsWireless Access Point TL-WA5110G
1 Detachable Omni directional antennas
Power supply unit
PoE Power Injector
Resource CD
Quick Installation Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC OS, NetWare, UNIX or Linux.
EnvironmentOperating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Download

Some official firmware of TP-LINK products can be replaced by the third party firmware such as DD-WRT. TP-LINK does not provide technical support and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.